Aluminum Windows Price in Kenya: Features, and Top Suppliers
Aluminum windows have become the preferred choice for both home project and commercial construction in Kenya ,due to their durability, sleek aesthetics, and adaptability to Kenya climatic conditions. The eara like coastal zones of Mombasa Nairobi and Kisumu, aluminum windows and door offer long-term performance with minimal upkeep specially it use prower coating( up to 3H+. UV-resistant, acid water proof and salt spray resistant for outdoor use. up to 10+ years service life, much more better than ordinary paint.). Now I will show you the detail aluminum windows price in Kenya and the factory price in China, including cost breakdowns by type, size, glass , hardware, installation, and leading suppliers
Article Overview
Benefits of Aluminum Windows in Kenya
Aluminum windows are highly valued in Kenya for the reasons:
- Durability: Resistant to rust, rot, warping, and termites( Kenya’s tropical and coastal climates).
- Low Maintenance: Require only occasional washing; no repainting or sealing needed for decades.However, you should be noted that ordinary painting may fade or change color after long-term use. Therefore, we recommend powder coating to our customers.
- Design Flexibility: Slim profiles enable larger glass areas, maximizing natural light and modern architectural appeal.In SIUPA WINDOWS ,the max size of windows is up to 3.8meter high , and the sliding door is up to 4.5 meter high.
- Strength-to-Weight Ratio: Ideal for high-rise buildings and large-span openings. We recommend that if the buildings higher than3 floors should use casement windows or fixed windows.This is not only due to wind resistance strength, but alsobecause casement windows have double hinges and anti-falling chains.
-
- casement windows hinges
Sustainability: 100% recyclable, aligning with Kenya’s green building initiatives and circular economy goals.
- Compliance: Most reputable brands meet KEBS KS EAS 296:2018 and KS 2421:2020 standards for structural integrity and weather resistance.
However, standard aluminum conducts heat, which can increase indoor temperatures. Thermal break technology—using a polyamide strip to separate interior and exterior frames—mitigates this but adds 5–10% to the unit cost.
Aluminum Windows Price in Kenya: General Overview
Pricing varies significantly based on window type, size, glass specification, hardware quality, and supplier. :
- 0.6MM Profile Basic sliding windows: KES 18,000 – 30,000 per square meter
- 1.2MM Profile Mid-range (powder-coated): KES 22,000 – 35,000
- High-end (double-glazed, soundproof, custom): 55,000+
Aluminum Windows Price From SIUPA WINDOWS to Kenya: General Overview
Pricing varies significantly based on window type, size, glass specification, hardware quality, and supplier. :
- 1.2MM Profile sliding windows: KES 10,000 – 12,000 per Square Meter
- 2.0MM Projile Mid-range (thermal break, powder-coated): KES 16,000 – 20,000
- High-end (double-glazed, soundproof, custom): KES 25,000 – 28,000+
Average Price Ranges by Standard Size
| Size (m) | Type | Price Range (KES) |
|---|---|---|
| 0.6 × 0.6 | Fixed | 5,000 – 12,000 |
| 0.9 × 1.2 | Casement | 9,000 – 18,000 |
| 1.0 × 1.2 | Casement | 10,000 – 22,000 |
| 1.2 × 1.2 | Sliding | 12,000 – 30,000 |
| 1.5 × 1.5 | Fixed/Sliding | 15,000 – 35,000 |
| 2.0 × 2.0 | Picture/Commercial | 25,000 – 55,000 |
Fixed windows are cheapest due to the absence of moving parts. Casement and sliding types cost more because of hinges, rollers, locks, and sealing mechanisms.
Price Comparison Across Major Kenyan Suppliers
| Supplier | Sliding (1.2×1.2m) | Casement (0.6×1.2m) | Fixed (1.0×1.0m) | Notes |
|---|---|---|---|---|
| Aluminum Windows Kenya (Nai*****) | 13,500 KES | 10,200 KES | 7,800 KES | KEBS-certified, showroom in Industrial Area |
| Glass & Aluminum Ltd (Mo*****) | 14,200 KES | 10,800 KES | 8,200 KES | Corrosion-resistant coatings for coastal use |
| Kenya Aluminum Systems (Na*****) | 12,800 KES | 9,500 KES | 7,200 KES | Offers thermal-break systems |
| Alu***** | ~13,000 KES | ~10,000 KES | ~7,500 KES | Largest local manufacturer |
| Fene***** | 16,000+ KES | 14,000+ KES | 10,000+ KES | Premium finishes, wood-grain options |
| Local Fab***** | 10,000–12,000 KES | 8,000–9,500 KES | 6,000–7,000 KES | Lower cost but verify aluminum thickness (>1.2mm recommended) |
Imported systems (e.g., Sc******) cost KES 25,000–45,000+ per unit and are typically used in luxury or institutional projects.
Chinese system SIUPA WINDOWS system cost KES 13000 per unit for double glass,thermal break .
Impact of Glass Type on Pricing
Glass selection significantly affects both performance and cost:
| Glass Type | Thickness | Cost Increase vs. Clear Float | Common Use |
|---|---|---|---|
| Clear float | 4–6 mm | Baseline | Basic residential |
| Tempered | 5–6 mm | +10–15% | Safety glazing (above 1m height) |
| Laminated (5+5 mm) | 10.76 mm total | +20–30% | Security, schools, banks |
| Double-glazed (Low-E) | 4+12A+4 mm | +25–40% | Energy efficiency, noise reduction |
| Tinted/reflective | 5 mm | +10–20% | Solar control in sunny regions |
Double-glazed units are still rare in mainstream Kenyan housing due to cost but are gaining traction in high-end apartments near JKIA or along Thika Superhighway.In Kenya, most double glazing uses ordinary non-tempered glass because of cost and local standard.
But for safety and durability, we suggest tempered double glazing for high-rise buildings, hotels, and modern apartments.
SIUPA WINDOWS GLASS TEST BY MR BRIAN
Hardware and Additional Features
Quality hardware ensures longevity and smooth operation:
- Stainless steel or powder-coated handles/locks: Included in most quotes.
- Mosquito screens: Add KES 1,200 – 2,500 per window.
- Thermal breaks: +50–100% cost; essential for Sound proof ,Water proof ,Heat insulation energy efficiency.
- Automatic openers (motorized): Can double the base price; used in commercial towers.
- Custom colors (powder coating): +10–15%.
Avoid cheap plastic rollers—they degrade quickly under UV exposure.
Installation and Additional Costs
Installation typically adds 15–25% to the window cost:
| Service | Cost (KES) |
|---|---|
| Basic labor per window | 2,000 – 4,500 |
| Wall opening preparation | 1,500 – 3,000 |
| Scaffolding (high-rise) | 3,000 – 6,000/floor |
| Old window removal | 1,000 – 2,500 |
| Sealing & waterproofing | 500 – 1,200 |
Additional considerations:
- Transport: KES 1,000 – 3,000 outside major cities.
- Finishing works (plaster, paint): KES 1,500 – 3,500/window.
- Permits: Required only for new structural openings (KES 5,000 – 15,000 in some counties).
Where to Buy Affordable Aluminum Windows in Kenya
- Nairobi Industrial Area: Home to Alupro, Kenya Aluminum Systems, and dozens of fabricators offering factory-direct pricing.
- SIUPA WINDOWS :Make the order on line and send to Kenya in 3 month.
- Mombasa: Specialized suppliers like Glass & Aluminum Ltd provide marine-grade finishes.
- Online Platforms: Jiji.co.ke, PigiaMe, and Sky.Garden list both new and second-hand units—but inspect before purchase.
- Wholesale Imports: Alibaba and 1688.com offer bulk discounts (10–20% lower), but ensure KEBS compliance and factor in shipping/customs.
Avoid unverified social media sellers; substandard alloys (<1.0mm thickness) warp within 2–3 years.
Suppliers and Manufacturers
- SIUPA WINDOWS :Leading Modern Aluminum Windows & Doors Factory in China | One-Stop Sourcing & Door-to-Door Delivery
- Alupro Limited – Leading local brand; KEBS-certified, recyclable materials, nationwide service.
- Aluminum Windows Kenya – Wide product range, free site measurement.
- Fenesta Kenya – Premium aesthetics, Indian-backed, strong warranty.
- Tostem East Africa – Japanese-engineered systems for high-performance buildings.
- Kenya Aluminum Systems (Nakuru) – Custom profiles and thermal-break solutions.
- Alutech Kenya – Focus on energy-efficient, Low-E coated windows.
- East African Glass & Aluminum (Kisumu) – Specializes in curtain walls and impact-resistant glazing.
All major suppliers provide technical drawings, test certificates, and after-sales support.
Conclusion
When evaluating aluminum windows price in Kenya, prioritize quality over initial savings. Ensure aluminum thickness is at least 1.2mm, glass meets safety standards (tempered or laminated where required), and installation is handled by certified professionals. While basic units start around KES 12,000, investing in thermal breaks, double glazing, or corrosion-resistant finishes pays off in comfort, energy savings.